USMXUKDEFRESITRU
V20.example.1

For 90° corners (+/- 60°) with Larssen U/Z/AZ sheet piles and cold formed sheet piles

fits

  • Larssen U (European)
  • Larssen AZ

works with

Larssen/U-Piles
AZ 12, 13, 14, 17, 18, 19, 25, 26, 27, 34, 36, 38, 46, 48, 50

steel grade
ASTM Grade 50 or better,
MARINER™ steel
weight
~ 8.85 lb/ft

In stock.

Place an order »

downloads

Need To Build a Sheet Pile Wall?

Configure a Solution on iSheetPile.com.


Installation

  1. Please review the proper interlocking examples that are listed.
  2. Thread the connector into the interlock while the sheet pile is out of the ground.
  3. Adjust the connector to the appropriate position.
  4. Tack or spot-weld the connector in place. Typically, a ~250mm (~10”) weld attaching the connector to the sheet pile to the top is sufficient.
  5. Drive/extract the sheet pile (with the connector attached) as you would normally.


V20.1
V20.2

PilePro® connectors are exclusively supplied through PilePro Steel, LP.
866-666-7453 / 512-243-1228 | info@pilepro.com